|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
The Voss transport, posted some time ago but which appeared in a much smaller scale, for some unknown reasons: MAN TGX 33-540 FDS 6x4/2 tractor + Goldhofer SPZ-DLA-46/80AAA 4-axle flatbed semi-trailer (Conrad models) carrying a 20' maritime container and access platforms of a MAN B&W 18V48/60CR marine engine (Tekno load and Conrad elements) IVECO/CFG Strator AS 440 S45 6x4/2 tractor (modified WSI model) and Langendorf Flatliner SB-4 3-axle prefabricated elements handling and transport semi-trailer (modified HiMoBo model) Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 7/6/2015 Posts: 1,317
|
Guy nice pictures as usual, the Iveco tractor looks similar to a Mack Pinnical tractor. The trailer it is hauling is another unusual model I have never seen before, what are some of the prefab loads it would carry. Thanks Steve
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Steve, Langendorf was the forerunner in Europe to what is called here the "Inloader", a semi-trailer with a peripheral frame around a central well able to load, carry and unload transport frames carrying glass (Floatliner) or concrete elements (Flatliner), using its on-board hydraulic system to lower and lift both its gooseneck and its independent axles. The Jangendorf semi-trailer modelled by HiMoBo is specialized in the handling and transport of concrete prefabricated elements for building walls. See the link to that Langendorf product: https://www.langendorf.de/en/products/inloader.phpI'll post tomorrow a homemade example of what can be carried. I hope it helps. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 7/6/2015 Posts: 1,317
|
Guy thanks for the information, very interesting trailers. It is nice to see the different ways loads are moved all around our world. Those trailers used for the prefab loads look like they don’t have axles. It would seem to me that a prefab load of say concrete would implode the trailer without the support of axles. The engineers always make what appears impossible, work. Thanks Steve
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
GuyM wrote:Steve,
Langendorf was the forerunner in Europe to what is called here the "Inloader", a semi-trailer with a peripheral frame around a central well able to load, carry and unload transport frames carrying glass (Floatliner) or concrete elements (Flatliner), using its on-board hydraulic system to lower and lift both its gooseneck and its independent axles wheels [...].
I'll post tomorrow a homemade example of what can be carried [...] You're right Steve: we can't talk about axles here but of 6 independent wheels, each attached on an arm equipped with a hydraulic ram for suspension and lowering/lifting duties. The Dutch combination mentioned above, in one of Staalbeton production sites, during the loading of a Langendorf bed carrying concrete prefabricated elements, 2 house walls of 30.6 tonnes and 2 riser pieces for retaining walls of 4 tonnes (homemade loads): HiMoBo have solved the difficulty of modelling the 6 small hydraulics arms securing the top of the load by providing 2 sets, one raised when empty and one in transport position. . Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
In the sixties/seventies, road haulage of plant equipment by Cadzow, heavy haulage company from Blantyre (Scotland): Atkinson Venturer 6x4/2 tractor and King Trailers 3-axle lowloader (Corgi models being modified) loaded with an approx. 20 tonnes Allis-Chalmers HD21 tracked tractor and a 6.08 tonnes Allis-Chalmers/LaPlant-Choate C108 towed scraper (First Gear models) Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Rogers 45 tonnes demilitarized tank transport trailer (Wespe kit) in Nicoletti livery: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 7/6/2015 Posts: 1,317
|
Guy thanks for the information, and a picture of the trailer with a heavy load. Great customization on the load also. Great detailing on the Rogers trailer where it hooks to the dump truck. Thanks Steve
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Exkvate3140 wrote:Guy|...] one question, where does one get the antennas from in this day and age. I have not even seen one of those in about 20 years, they look great for the telescopic piston. It is just what I need for the single axle dump trailer I’m building. Thanks Steve Steve, I got a response from Jean-Francois which can be translated as follows: "The antennas come from my stock. I used in the past to get them from cheap toys radio-control boxes, small radio or mini-TV sets. Today I think that all these items can still be found in flea markets". I hope it helps. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 7/6/2015 Posts: 1,317
|
Guy thanks for the information and please tell Jean-Francois thanks also. I will try some flea markets, and if I’m not successful I will just figure something out with styrene. Thanks again for spending time on getting the information, much appreciated. Steve
|
|
Rank: Advanced Member Groups: Member
Joined: 6/18/2003 Posts: 2,179 Location: Charlotte, North Carolina
|
Exkvate3140 wrote:Guy thanks for the information and please tell Jean-Francois thanks also. I will try some flea markets, and if I’m not successful I will just figure something out with styrene. Thanks again for spending time on getting the information, much appreciated. Steve Hey Dick Tracy: Just go on Ebay and look for old portable radios. Their probably in the fishing equipment aisle. What is it you said you do down in the basement all day??????
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Unic ZU 51 tractor and ex-WW2 semi-trailer built from Minicirque kits by Jean-Jacques in "Jean-Paul Transports" livery: Another unit of that company trucking only on Jean-Paul's shelves, a Bernard TD180/35 tractor: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Delivery of windmill tower sections by Ter Linden, a Dutch heavy haulage company: DAF FTM XF105-510 8x4/4 tractor + Nooteboom Mega Windmill Transporter (MWT) on 3-axle front dolly and 7-axle rear trailer (WSI models) carrying the bottom section of a windmill mast (WSI element) Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Another windmill transport, in Scotland this time, by a West of Scotland heavy haulage combination: Scania T164G-530 6x4/2 tractor + Nooteboom Euro 54.03 3-axle lowloader (Corgi models) carrying a Vestas windmill rotor head (Corgi load). Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 7/6/2015 Posts: 1,317
|
Guy very nice windmill loads, that DAF tractor and trailer haul is very detailed. Have you ever witnessed a load like that first hand and up close, it looks like you have. Thanks Steve
Quinella, I go on EBay and there is some frequent seller who goes by the name goldenshower or golden0000 and he said something about antennas he found in his wife’s under garment draw, and when I tried to contact him the site went right to a n NC State Police station. So I gave up on EBay. As far as what I do down in the basement all day, l am building a bamboo fly rod and some excavator lures to fish in my Walmart pool that I stocked with gold fish. If that does not work I have dynamite, so either way I will be successful. Dirt and soon to be fish guy.
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Jean-Francois decided to build the cab fitted on all Nicoletti TD25 bulldozers: To be continued. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Delivery of Goldhofer equipment in Holland: DAF FT 85CF-410 6x2/4 tractor and its Pacton Vario-X Press 3-axle flatbed semi-trailer (modified Tekno models) carrying 2 boxed Goldhofer PST/SL-E hydraulic-driven lines (modified Bemo Models load) and a 5-line Goldhofer THP/ET5 modular trailer (repainted Conrad modules) Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
In the seventies in UK, a Malcolm Plant Ltd combination is delivering BICC electrical cable drums somewhere in the Scottish Highlands: Atkinson Venturer 6x4/2 tractor + Montracon 3-axle shortened flatbed semi-trailer (modified Corgi models) loaded with 4 cable drums (Corgi loads) Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 7/6/2015 Posts: 1,317
|
Guy tell him that cab is outstanding, looks like it is fresh from the factory. Is that styrene all hand cut? The opening door and window with those hinges, now that is skill. It is amazing the talent you guys have. Thanks for showing that cab. Steve
|
|
Guest |