|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
The German-made roller: To be continued. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
The American-designed roller: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Other Richelmi (Monaco) combination built by Jean-Jacques with a Conrad tractor: The Richelmi combination on a construction site in Monaco: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
2 Richelmi combinations (Monaco) in the seventies: To be continued. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
To end with that short trip in Monaco, some other Richelmi site equipment in the 60s/70s: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
GuyM wrote:Australian road train[...]the "A Double Road Train" displayed here is "only" made of 2 trailers, limited to 36.5 metres and 79 tonnes, while "A Triple Road Train" comprising 3 conventional trailers can operate legally up to 53.5 metres and 115.5 tonnes in Australia [...] In Europe, "road trains" are only accepted in Sweden and Finland (except for 25.25 metres LCVs, tested recently in various European countries). Sweden switched from left to right-hand drive in the fifties, then accepted on their road network 24 metres and 51.4 tonnes "road trains" early 70s, without any height limitation. That number increased to 56 tonnes early 90s and is today 60 tonnes for 25.25 metres (length of a LCV). A Swedish "road train" in the nineties: Volvo FH16-P520 6x2/2 fitted with a Norfrig reefer body (modified Conrad model) and Norfrig WH4-38-125 CKÖM 2+2-axle reefer trailer (modified Conrad model), 1970s Swedish "road train" reproduced by Tekno (already displayed in this forum): Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
GuyM wrote:In Europe, "road trains" are only accepted in Sweden and Finland (except for 25.25 metres LHVs, tested recently in various European countries). Sweden switched from left to right-hand drive in the fifties, then accepted on their road network 24 metres and 51.4 tonnes "road trains" early 70s, without any height limitation. That number increased to 56 tonnes early 90s and is today 60 tonnes for 25.25 metres (length of a LHV).[...] The official name for 25.25 metres combinations, road tested in various European countries around 2010, is "LHV" ("Longer and Heavier Vehicle") and not "LCV" ("Longer Combination Vehicle"), as indicated wrongly in my previous post. Sorry! Other Swedish combination. In the 90s, the semi-trailer width (2.60 metres) and more importantly its height (4.50 metres) restricted the combination to Sweden road network and it was prohibited in neighboring European countries: Volvo F16-T470 6x2/2 tractor and Norfrig WH3-39-125 CFÖM 3-axle reefer semi-trailer (modified Conrad models, fifth wheel to be painted), Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Within Jean-Jacques' collection, a Caterpillar D9G bulldozer in Spada(*) livery (the unit originally was a Gescha/Conrad model): Note (*): Spada is a 100-year old civil engineering and construction company located in South-East of France. Link to their website (in French, sorry!): https://spadagroup.fr/ . Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Two hooklift tippers in Jean-Jacques's collection. The MAN unit is produced by Conrad, the Renault is a Conrad chassis-crane with tipper modified by adding MiniCams cab and various parts: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
An intermodal transport on "the other side of the Pond": Peterbilt 579 6x4/2 tractor and Cheetah Chassis Corp. 40' 12-Pin container carrier 2-axle semi-trailer (modified Diecast Masters models) loaded with a 40ft Qingdao Xinhuachang International CX10-4112X/1 maritime container (Diecast Masters model), Link to the semi-trailer specs page: https://www.cheetahchassis.com/containerchassis/40-straight-frame-49-spread-2-axle-chassis/Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
In the USA still with an iconic tractor, the Mack B61. Mack produced more than 47 000 B61 trucks with approx. 125 000 B Series vehicles built from 1953 to 1996 (data issued from "Mack Model B - 1953 to 1966" T.E. Warth, Iconografix Editions): Mack B 61 6x4/2 tractor (modified Dinky-Matchbox(*) model) and Fruehauf-US DES-M2-M20/40 2-axle belly dump semi-trailer (Corgi Toys model being modified), Note (*): Matchbox took-over Dinky Toys en 1987 and will produce a few (4?) models in 1/50 scale in the Dinky Collection. Tyco sold Matchbox to Matteï in 1997. Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Other 1/50 Dinky-Matchbox(*) model, a 1939 Peterbilt tractor: Peterbilt 344 DT 6x4/2 tractor (modified Dinky-Matchbox model) and Trailmobile 33' 2-axle reefer semi-trailer (modified Corgi model, to be repainted), Note (*): to the best of my knowledge, only 3 other models were ever produced in that scale by Matchbox in the short-lived Dinky Collection, a Diamond T 910 4x2 tractor, a Fruehauf Aerovan 1-axle box semi-trailer and a Mercedes-Benz O 3500 4x2 coach in a German transport company livery. All these were already displayed in this topic. Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Late 2010, Solido is back to military modelling, some 1/48 models being built by them in Bangladesh in resin for the American train producer, MHT Electric Trains(*). A page of the train modeller 2019 catalog: An US Army vehicle being tested by the Royal Saudi Land Forces: General Dynamics Land Systems MGS Stryker M1128 8x8/4 armored vehicle (Solido model), Note (*): Solido subcontracting activities didn't last very long, as the American company disappeared in 2021 in their original form, with the retirement of Mike Wolf, its founder. The few Solido models - very well detailed, as far as I could see - of the defunct American company, were sold direct by the French company from that date: https://www.solido.com/echelle/1-48/?orderby=dateLink to the Stryker Wikipedia page: https://en.wikipedia.org/wiki/StrykerRegards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Towing of the armored vehicle by a Saudi Arabian civilian wrecker: - Mercedes-Benz Zetros 3643 A 6x6/2 truck with front winch and Empl EH/W 200 Bison under-chassis extendable wrecking device with 2 winches (IMC model), - General Dynamics Land Systems MGS Stryker M1128 8x8/4 armored vehicle with 105mm cannon and 7.62 + 12.7mm machine-guns (Solido model), Austrian manufacturer press paper about the Bison/Zetros wrecker (in German, sorry!): https://www.empl.at/aktuelles/pressemitteilungen/bericht/empl-liefert-erstes-bison-bergefahrzeug-auf-zetros-chassis/ Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Volvo F89 4x2 tractor built by Jean-Jacques from a Tekno kit: Regards. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 8/19/2013 Posts: 721
|
The IMC Zetros looks wonderful. How does it feel in the hand being resin?
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Jamie,
It looks all right in terms of weight. As for many resin models, its level of detail is amazing. The only problem I found were rams, which need to be "helped" by a wooden stick when towing a vehicle, as they can't hold the load. Its normal retail price looks quite high, at approx. 165 Euros, but I found it for sale a little bit less than 100 Euros on a French website.
I hope it helps. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 8/19/2013 Posts: 721
|
Yes, thanks. I had a look online after seeing your pictures. Perhaps I could modify a Siku model?!
|
|
Rank: Advanced Member Groups: Member
Joined: 9/4/2005 Posts: 3,348 Location: Le Muy - Var - France
|
Jamie,
That would work fine but I hope that you have 1/50 good-looking cross-country tires as the Siku ones are "toyish"; moreover the Siku model is fitted with single tires all round, while the Zetros/Empl unit has dual tires on the tandem, resulting in an extra width.
I hope it helps. Guy
|
|
Rank: Advanced Member Groups: Member
Joined: 8/19/2013 Posts: 721
|
Ah yes. ....maybe not then!
|
|
Guest |