I see people posting pictures and discussing various types of equipment they collect but I realized I do not see any comments about road graders. Does anyone on the forum collect these?
Thanks,
Gregg

Although I collect a little bit of everything, I only have two motor graders in 1/50th scale, the Gescha Cat 12F, and NZG 12G. I am fine with only two in my collection and have no plans to add more unless Liebherr decides to make one in 1/1 scale which subsequently results with one being made in 1/50th scale then I may be tempted to buy one. I do however have some more in smaller scales.

Gescha 1/50 Cat 12F


NZG 1/50 Cat 12G


Grip Zechin 1/96 Cat 14E's made in the mid 70's in Japan.


Tomica 1/81 Komatsu GD675-6 released in 2016. This was never available in North America to purchase and had to have it ordered from Japan.


Zylmex Zee Toys Mini Macks Motor Grader (Caterpillar 12G?)

---

-Mike, Collecting 1/50th Construction Diecast Since 2003.
View My Collection Here, As of 03/29/24

The First Gear Komatsu GD 655 is tough to beat. Looks great with great functionality. Overall a really impressive piece especially considering it's over 15 years old.

---

My Facebook page: NorCalDiecastCustoms

Clifton

I have 2, a Norscot Cat 24H and an NZG Terex TG 190A. The T Rex one isn't too bad for the size and it has a front dozer blade too.

---

Dain

I'm a kid at heart, so I will play with any model construction vehicle from 1:87 scale to 1:1 scale!!!!

Age is a state of time NOT a state of mind!!

THE NUT PART IS RIGHT

Yes CAW, I also am a dozer guy. Plus I like anything with a winch on it vs. a ripper. And, for some reason D9Gs are my favorite,

Well, the schmucks are out in full force it seems. Now would be a good time for Chuck to comment!!! CAW

I have quite a few graders. I'm quite partial to them since I've spent quite a few hours running them.

I'm not too particular on scale but most are 1/50.

2X Arpra Caterpillar 140B (Both Pac-Man and Black Stripe logos)
Ertl Case 855
Gescha Caterpillar 12F
Norscot Caterpillar 140H
Norscot Caterpillar 140M
Norscot Caterpillar 24H
Diecast Masters Caterpillar 14M
NZG Caterpillar 12G
NZG Caterpillar 16G
Modeline Fiat-Allis FG170.B
Modeline Fiat-Allis FG200
NZG HBM Nobas BG 190 TA-3
Ertl John Deere 772CH (Series I)
X3 Ertl John Deere 772CH (Series II)
Ertl John Deere 872D
Ertl John Deere 872G (Custom)
X3 Ertl John Deere 872GP
Minimac Dresser/Galion 850
Goodswave Mitsubishi MG400
Diapet Komatsu GD605-A
First Gear Komatsu GD655A (Standard)
X2 First Gear Komatsu GD655A (Snow Removal Ver. One Yellow, One DOT Orange)
Ertl New Holland G200
Modeline New Holland RG200
Motorart New Holland F156.7
NZG O&K G130
Motorart Volvo G740B

In addition I do have some 1/64 Ertl John Deere 672B & 772BH and at least a half dozen Caterpillar 12G models, A little Tomica #24 Komatsu GD655 in Nexco livery. Lastly I also have a 1/24 scale Ertl John Deere JD570-A.

---

-William
Jack of all trades, Master of none.
Miniature Construction Models

Here are mine. I threw in some lowboys for "Mr. Q." Only one not shown is a Cat Arpra Cat 140. The 16G is getting a V-plow attached.


100_3794 by Ken Wheeler, on Flickr"/>


100_3784 by Ken Wheeler, on Flickr"/>


100_3788 by Ken Wheeler, on Flickr"/>


100_3792 by Ken Wheeler, on Flickr"/>


Oshkosh Cat 14M 3 by Ken Wheeler, on Flickr"/>

You can’t operate a 1/50 scale rock quarry, a heavy/highway, or a mass excavation and embankment fleet all at the same time, you’re building and maintaining hundreds of miles of forest access roads without graders!!

I think my favorite one is the NZG 16G that I customized with the tires off of a Norscot 725 truck. The real 16G I was running at that time had the same size tires on it.

---

Are you an enviromentist, or do you work for a living?