Did some 3D design and printing again ,
This time it's a set of load test weights and a equalizer bar.
Made 3 weights sets , 20 Ton , 50 Ton and a 100 Ton.
Can be used as a single weight set or double in combination with the equalizer bar.
They are printed as one solid piece but have a hollow chamber on the bottom side.
This can be filled with what ever you want for the weight , piece of metal , lead , concrete etc.
Dimensions are 20Ton = 36 X 58 MM , 50Ton = 66 X 80 MM and 100Ton = 56 X 100 MM.
Equalizer bar = 80 X 43 MM.
Al this can be ordered by shapeways again :
Shapeways shop IMG_20190510_150035 by
eef 7260, on Flickr
IMG_20190510_145856 by
eef 7260, on Flickr
IMG_20190510_150145 by
eef 7260, on Flickr
IMG_20190510_150308 by
eef 7260, on Flickr
IMG_20190510_150113 by
eef 7260, on Flickr
And some Manitowoc parts , a pendant rope spreader , can be found here :
Shapeways shopIMG_20190417_113742 by
eef 7260, on Flickr
Pendant spreader 3 by
eef 7260, on Flickr
And a set of Manitowoc pendant connectors can be found here :
Shapeways shoppendants by
eef 7260, on Flickr
Assembly1 by
eef 7260, on Flickr
***
Flickr American cranes group***
3D printed crane parts at Shapeways***
3D printed crane parts at I.materialise