Regards.
Guy

Other Ladeguter Bauer element:



Scania/Läxä R420 8x4/4 tractor (modified(*) NZG model) and Scheuerle InterCombi 50 L2/10 10-line lowbed modular semi-trailer (WSI model), loaded with nearly 17 tonnes of Scheuerle ultra-low vessel-bed elements (WSI model) and with 2 Richter Maschineneile AG steel plates of 51 tonnes each (modified(*) Ladeguter Bauer elements),





Note (*): lmodifications were as follows::
- NZG tractor: its fifth wheel was replaced by a modified WSI one and cab decals removed,
- WSI semi-trailer: the vessel beams elements were removed from the 4-bed-6-line origin semi-trailer,
- load: the 102 tonnes load was part of a Ladeguter Bauer assembly built for O train models: its original support was removed and replaced by 3 wooden beams.

To be continued.
Guy

MAN TGX 18-680 BLS 4x2/2 tractor (modified(*) Joal model) and Faymonville MAX100 N-3A-9.30 (U) 3-axle lowboy (modified(*) Cavallino model) carrying a MAN TGS 26 440 BL 6x2/2 truck fitted with an Esterer tank (Siku model being modified(*)),





Note (*): modifications were as follows:
- tractor:Joal fifth wheel was removed and its chassis milled, a WSI-type 5th wheel was installed instead. Two flashing lights were added on the roof,
- semi-trailer: the Cavallino connecting pin was replaced by a WSI-type one,
- tanker truck: the Siku wheels were changed to Tekno ones; the pipe stopping mechanism replaced by a small washer, the emptying system at the back plugged. A third manhole is to be added on the top of the tanker.

Regards.
Guy

Craig,

Many thanks for your positive comments.

Guy

Volvo FH4-T560 6x2/2 tractor (WSI model) and Burgers BAO-15-27 GZ 3-axle double floor box semi-trailer with a Dhollandia DHSH hydraulic tailgate (modified(*) Tekno model),







Note (*): the Tekno model had its coupling pin removed and replaced by a WSI-type one and the "Scania" decals ripped-off, this model being specifically produced for the Swedish truck manufacturer (see page 8: https://www.scania.com/content/dam/scanianoe/market/tw/experience-scania/merchandise/New_Model_Catalogue_2019.pdf ).

Regards.
Guy

The Conrad Mercedes-Benz with 2 Siku lighter tippers. The Poclain excavator (with its cab) is also a Conrad product:









Regards.
Guy

Scania 164G-T580 8x4/4 tractor with removable HFR rear additional axle (WSI model) and Scheuerle InterCombi 50L2 2+4 modular semi-trailer with 4-line rear flatbed plus 2-line integrated front dolly (modified(*) WSI model) loaded with a 70 tonnes Vestas V162*5.6/6.0 windmill nacelle (IMC load),





Note (*): both extendable beams have been removed from the modular semi-trailer and their widening supports connected together.

To be continued.
Guy

Berliet GBC 8KT 6x6/2 truck fitted with a Camiva FIPD box intervening in case of dangerous goods (Solido model),



As a bonus, the GBC 8KT/Camiva FIPD from Rouen (Seine Maritime) Fire Brigade:



Regards.
Guy

Craig,

The Torben Rafn Scania is a 8x4 (twin steer) but, as far as I know, its second axle does not lift. The tractor can be seen below:



I hope it helps.
Guy

Ford F550 CC 4x4/2 pick-up truck with skate body (Menards(*) model), carrying 6 Goodyear 50X31.00-26HP plant equipment tires on a wooden support (modified Menards load(*)),







Notes (*): Menards is an US large stores group, building in 1/48 scale some items to be carried on O trains (1/48 in USA), which are sold in these stores as well.
The Goodyear tires are resting on a homemade wooden support, allowing them to be carried in 'normal" position.

Regards.
Guy